GW Instek GSP-810 User Manual - Manual (Page 39)

GSP-810 User Manual
37
TG Function
All TG control functions can be remote control. The control is worked when the TG
mode is in use. Clicking TG Mode/SA Mode can toggle the TG and SA control.
Trace Record
Trace Record offers the ability to store the dynamic trace in memory. It is very
convenient to long term recording for tracking the sudden interference or signal.
Record To record the trace. The recording period can be set in “Setting”
function.
Play To play the trace that was just recorded.
Save To save the recorded trace to a file.
Load To load the saved trace for preparing to play.
General Function
Peak To find the Peak with the Marker 1.
TG Mode To enable the TG controls remotely.
The others are the same as GSP810try.