GW Instek GSP-810 User Manual - Manual (Page 36)

GSP-810 User Manual
34
There are File, Setting, About and Help functions on the display area.
File To quit this application, same as Quit in Control Panel.
Setting To set the configuration of the display.
About Information of this application program.
Help Help file of this application program.
Control Panel
The available functions are Shutter, Print, AVG ON, Freeze, Start/Stop, Load and
Quit.
Shutter To save the trace as a JPG file. The saved directory can be defined in
“ Setting ” of Display area.
Print To directly print out the Display area through printer.
AVG ON To activate the Average function. Click again to disabled.
Freeze To Freeze the trace sweep. Click again to disable.
Load To load the recorded trace for preparing to play. When loading the
record, at least one trace file should be existed.
Start To Start to display the trace on PC. A Stop key is followed to show up.
Click the Stop will stop displaying trace.
Quit Quit this application.