GW Instek GSP-810 User Manual - Manual (Page 22)

GSP-810 User Manual
20
MEMORY OPERATIONS: SAVE / RECALL
The save and recall functions are accessed by pressing the MEMORY key. The
bottom half of the screen shows one line for saving and one line for recalling up to
10 setups.
The “Recall” field provides the user with the ability to recall up to 10 different
configurations of the GSP-810 including main screen fields, markers, tracking
generator fields, and the power meter fields. To recall a new set of parameters,
press the Î key to move the cursor to the load number field. Then use the
SPINNER to change the number from 1 to 10. While the cursor is on that field,
pressing the ENTER key will load the current state of the GSP-810 with the loaded
parameters.
The “Save” field provides the user with the ability to save up to 10 configurations of
the GSP-810 including the main screen fields, markers, tracking generator fields,
and the power meter fields. To save the current state of the unit, press the Î key
to move the cursor to the save number field. Then use the SPINNER to change the
number from 1 to 10. While the cursor is on that field, pressing the ENTER key will
save the current state of the GSP-810 into that storage location.
CENTER
SPAN
REF LVL
RBW
7 8
.
6
SHIFT
PK->MKR
MKR->CF
SETUP
TRACE
MKR
MKR
E
N
T
E
R
MHz
dBm 4 5
2 1
0
3
9
-
SPAN
CENTER
REF LVL
DEMOD
MEM
TRK GEN
RBW
PWR MTR .
500.000MHz 20 dBm
100MHz/div 4 MHz
1.Recall Setup: 1
2.Save Setup: 1
500.000MHz 20 dBm
100MHz/div 4 MHz
1.Recall Setup: 1
2.Save Setup: 1