Fire-Lite MS-10UD Series FACP User Manual
Ms-5ud series ms-10ud series, Fire alarm control panels, Manual
This manual is related to the following products:
Table of contents
Document Outline
- Table of Contents
- Section 1: Product Description
- Section 2: Installation
- 2.1 Backbox Mounting
- 2.2 Operating Power
- 2.3 Input Circuits
- 2.4 Output Circuits
- 2.5 Power-limited Wiring Requirements
- 2.6 Digital Communicator
- 2.7 Installation of Optional Modules
- 2.8 ANN-BUS Devices
- 2.9 ANN-BUS Audio Panel
- Section 3: Programming
- 3.1 User Programming
- 3.2 Initial Power-up
- 3.3 Programming Screens Description
- 3.4 Programming and Passwords
- 3.5 Master Programming Level
- 3.6 Maintenance Programming Level
- Section 4: Operating Instructions
- 4.1 Panel Control Buttons
- 4.2 LED Indicators
- 4.3 Normal Operation
- 4.4 Trouble Operation
- 4.5 Alarm Operation
- 4.6 Supervisory Operation
- 4.7 Process Monitor Operation
- 4.8 Hazard/Tornado Condition Operation
- 4.9 Medical Alert Condition Operation
- 4.10 Disable/Enable Operation
- 4.11 Waterflow Circuits Operation
- 4.12 Detector Functions
- 4.13 Time Functions: Real-Time Clock
- 4.14 Coded Operation
- 4.15 Presignal
- 4.16 Positive Alarm Sequence
- 4.17 Special System Timers
- 4.18 Walktest
- 4.19 Read Status
- Section 5: Central Station Communications
- Section 6: Local/Remote Site Upload/Download
- Section 7: Power Supply Calculations
- Appendix A: Ademco Contact ID Format Event Code Descriptions
- Appendix B: NFPA Standard-Specific Requirements
- Appendix C: FACP with Keltron
- Appendix D: Wire Requirements
- Appendix E: Default Programming
- Appendix F: Canadian Application
- Index