Fire-Lite 411UDAC Fire Alarm Communicator User Manual
411udac, Fire alarm communicator, Manual
Table of contents
Document Outline
- Table of Contents
- Section 1: Product Description
- Section 2: Installation
- Section 3: Modes of Operation
- 3.1 Normal Mode
- 3.2 Password Creation and Entry
- 3.3 Real Time Clock Mode
- 3.4 Program Mode
- 3.4.1 DACT Programming
- Primary Central Station Phone Number (00 - 19)
- Primary Central Station Number Communication Format (20)
- Event Codes - Setting Entries
- Ademco Contact ID Format Primary Central Station Event Codes
- 4+2 Standard and 4+2 Express Formats Primary Central Station Event Codes
- All 3+1, 4+1 and 4+2 Expanded Formats Primary Central Station Event Codes
- Primary Central Station Number Account Code (21 - 24)
- Primary Central Station Number 24 Hour Test Time (25 - 28)
- Primary Central Station Number 24/12/8/6 Hour Test Time Interval (29)
- Secondary Central Station Phone Number (30 - 49)
- Secondary Central Station Number Communication Format (50)
- Ademco Contact ID Format Secondary Central Station Event Codes
- 4+2 Standard and 4+2 Express Formats Secondary Central Station Event Codes
- All 3+1, 4+1 and 4+2 Expanded Formats Secondary Central Station Event Codes
- Secondary Central Station Number Account Code (51 - 54)
- Secondary Central Station Number 24 Hour Test Time (55 - 58)
- Secondary Central Station Number 24/12/8/6 Hour Test Time Interval (59)
- AC Loss Reporting Delay (60)
- Backup Reporting (61)
- Reserved for Future Use (62)
- DACT Trouble Reminder (63)
- Operational Mode Selection (64)
- Input Channel 1 Function Selection (65)
- Input Channel 2 Function Selection (66)1
- Input Channel 3 Function Selection (67)1
- Input Channel 4 Function Selection (68)1
- Input Channel 1 Delay Timer (69 - 71)
- Input Channel 2 Delay Timer (72 - 74)2
- Input Channel 3 Delay Timer (75 - 77)
- Input Channel 4 Delay Timer (78 - 80)1
- Touchtone/Rotary Select for Primary Phone (81)
- Make/Break Ratio for Primary Phone (82)
- Touchtone/Rotary Select for Secondary Phone (83)
- Make/Break Ratio for Secondary Phone (84)
- Output Relay #1 Enable (85)
- Output Relay #1 Function Selections (86)
- Output Relay #2 Enable (87)
- Output Relay #2 Function Selections (88)
- Reserved for Future Use (89)
- Panel Unlock (90)
- Alarm Verification Enable (91)
- Silence Inhibit Notification Appliance Circuit (92)
- Autosilence Notification Appliance Circuit (93)
- Restoral Method (94)
- Coding, Notification Appliance Circuit (95)
- Trouble Call Limit - Dialer Runaway Prevention (96)
- Panel Identification Number (97 - 100)
- Service Terminal 1 Phone Number (101 - 120)
- Ring Count on Primary Phone Line (121 - 122)
- FAX/Answer Machine, Primary Phone Line (123)
- Service Terminal 2 Phone Number (124 - 143)
- Upload/Download Reports Sent to Secondary Central Station Phone #, Backup or Always (144)
- Programming Event Code Settings (145 - 312)
- 3.4.1 DACT Programming
- 3.5 Default Mode
- 3.6 Troubleshoot Mode
- Section 4: Central Station Communications
- Section 5: Remote Site Upload/Download
- Section 6: Battery Calculations
- Appendix A: Programming Sheets
- Appendix B: Event Codes/Transmission Format Programming Sheets
- B.1 4+2 Standard & 4+2 Express Formats Primary Central Station
- B.2 4+2 Standard & 4+2 Express Formats Secondary Central Station
- B.3 4+2 Standard & 4+2 Express Formats Primary Central Station
- B.4 4+2 Standard & 4+2 Express Formats Secondary Central Station
- B.5 All 3+1, All 4+1 and 4+2 Expanded Formats for Primary Central Station
- B.6 All 3+1, All 4+1 and 4+2 Expanded Formats for Secondary Central Station
- B.7 All 3+1, All 4+1 and 4+2 Expanded Formats for Primary Central Station (Factory Defaults)
- B.8 All 3+1, All 4+1 and 4+2 Expanded Formats for Secondary Central Station (Factory Defaults)
- B.9 Ademco Contact ID Format Primary Central Station
- B.10 Ademco Contact ID Format Secondary Central Station
- B.11 Ademco Contact ID Format Primary Central Station (Factory Defaults)
- B.12 Ademco Contact ID Format Secondary Central Station (Factory Defaults)
- Appendix C: Ademco Contact ID Format Event Code Description
- Appendix D: Events and Default Event Codes
- Appendix E: Operational Modes
- Index