Detcon X40-32-N7 - Manual (Page 53)

Model X40
Model X40 Instruction Manual Rev. 3.3 Page 47 of 64
10. A swipe over the ENTER marker will select the field indicated by the arrow prompt and the value
can be changed by swiping over the markers of the up or down arrows.
11. Another swipe over the ENTER marker will save the selected value.
12. Once the desired values have been set, move the arrow prompt to "Change Date" and swipe the
ENTER marker to update the date with the changes entered.
13. A swipe of the PROG marker at any time while setting the time or date will escape out of the
current menu with no changes saved.
5.2.8 View TWA and Peak
1. Verify that a secure digital (SD) memory card is installed in the SD slot of the X40 controller board
(J9).
2. Upon entering this menu, the user can view the data recorded from the SD card and is displayed as:
:
MM/DD/YY, HH:MM:SS, Channel #, TWA #, PEAK #
Example:
TWA_P08.CSV:
05/17/11,23:00:09,17,
51, 100
The sensor readings are continuously logged to the SD card. This data can also be viewed by removing the
SD card and inserting it in a laptop using the Detcon Log File Viewer application. Refer to the Detcon Log
File Viewer instruction manual for detailed information.