Secure digital card, 0 secure digital card – Detcon X40-32-N7 User Manual
Page 46
Model X40
Model X40 Instruction Manual
Rev. 3.3
Page 40 of 64
4.0 Secure Digital Card
NOTE
Ensure that power is turned off to the X40 before installing or removing the SD card.
1. Install the SD card in the SD slot (J9) on the back of the controllerꞌs PCA before the controller is
powered up.
2. The controller will notify the user if a successful installation of the card was achieved upon power
up.
3. The controller will automatically format the card and create the necessary files for data logging.
Refer to Section 5.2.8 for more information regarding the data logging feature.
NOTE
Data logging does not occur during the first 10 minutes after power-up of the unit. This
delay allows the sensors time to stabilize, so that inaccurate or faulty readings will not be
logged during this stabilization period.