Detcon RD-64X-N7 User Manual
Remote display unit, Operator’s installation and instruction manual
Model RD-64X-N4X
Model RD-64X-N7
Remote Display Unit
MODEL RD-64X-N4X
Remote Display
Operator’s Installation and Instruction Manual
Covers all Model RD-64X Remote Displays
DETCON, Inc.
4055 Technology Forest Blvd, Suite 100
The Woodlands, Texas 77381
Ph.281.367.4100 / Fax 281.298.2868
April 02, 2012 • Document # 3779 • Revision 0.1
H
www.detcon.com
This manual is related to the following products:
Table of contents
Document Outline
- 1. Introduction
- 2. Installation (N4X Enclosure)
- 3. Installation (N7 Enclosure)
- 4. RL-4 Alarm Outputs
- 5. Initial Start-up
- 6. Secure Digital Card
- 7. System Operation and Configuration
- 7.1 Operator Interface
- 7.2 Main Display Functions
- 7.3 Menu Functions
- 7.3.1 Auto Configure System
- 7.3.2 Set # of Channels/RL4s/Alarm Stations
- 7.3.3 Set # of RXT-320s (Wireless Function Only)
- 7.3.4 Set RF Silence and RF Sleep (Wireless Function Only)
- 7.3.5 Set COMM Baud Rates
- 7.3.6 Set Modbus Timeouts
- 7.3.7 Setup Channel Data
- 7.3.8 Set Channel RL4/Alarm Station Banks
- 7.3.9 Set Relay Function
- 7.3.10 Flashing Blue LED Codes
- 7.3.11 Set Modbus Address
- 7.3.12 Inhibit & Alarm Test Mode
- 7.3.13 RF Link Quality and Battery Status (Wireless Function Only)
- 7.3.14 System Diagnostics
- 7.3.15 Display Settings
- 7.3.16 Time and Date
- 7.3.17 View TWA & Peak
- 7.4 Optional Remote Alarm Reset/Acknowledge Switch (N7 Enclosure)
- 8. Modbus Communications
- 9. Wireless Option (RXT-320)
- 10. Warranty
- 11. Specifications