Triton FT5000XP PC-BASED ATMS User Manual - Manual (Page 64)

4 4
M
ODEL
RL/FT5000 XP U
SER
M
ANUAL
D
ISPLAY
P
OWER
-U
P
S
EQUENCE
When the ATM is powered on, or has been re-booted, “Out of Service” is dis-
played on the front screen. The rear screen (FT
XP model) will display the “ATM
Status” screen. After the power-up sequence is complete, the “ATM Startup
Options” screen will be displayed on the front LCD of the RL
XP . On the FT XP , the
startup option will be displayed on the rear LCD - the front LCD will display the
“Out of Service” screen.
Figure 5-1. Start-up menu displayed on front LCD (RL XP ) and rear LCD (FT XP ).
The user selects the desired function by pressing either number <1> for Man-
agement Functions or number <2> for Customer Transactions.
When the Customer Welcome screen is displayed, you can access the Manage-
ment Functions menu by following the procedure described next.
Â
Press and hold down the blank key; while holding down the
key, press the <1> key. Release both keys. After a moment the
“Security Login” screen will be displayed.
A
CCESSING THE
M
ANAGEMENT
F
UNCTIONS
M
ENU
DEFAULT MASTER PASSWORD
The default master user ID is “00” and the password is “1234”. The Master
User ID is always ‘00’ and can not be changed!
To enter Management Functions as the master user, enter “00” and “1234”.
CHANGE THE MASTER PASSWORD IMMEDIATELY TO PREVENT
UNAUTHORIZED ACCESS TO THE ATM!