Triton FT5000XP PC-BASED ATMS User Manual - Manual (Page 138)

118
M
ODEL
RL/FT5000 XP U
SER
M
ANUAL
3. C
URRENCY
V
ARIANT
. This function allows user to enter the currency variant
of the bills in the specified cassette. If there is no value sent from the
device, the default value is set to ‘0’. Press <3> on the keypad to enter the
value. Press when completed.
4. C
URRENCY
V
ALUE
(W
HOLE
A
MOUNT
). This function allows user to enter
the currency value for the selected cassette. This field accepts the whole
dollar amount (Example: ‘20’). If the “Media Type” is set to “Non-Currency”,
this menu item will be grayed out and the value is set to ‘0’. The maximum
length of this field is eleven (11) digits and the maximum value is
99,000,000,000. If there is no value sent from the device, the default value
is set to ‘0’. Press <4> on the keypad to enter the value. Press
when completed.
When the is pressed, the input value is validated. The valid value
can only have two (2) significant digits and 0 to 9 trailing zeros. For example,
the input value of ‘100’ is valid but the input value of ‘101’ is invalid. If the
input value is invalid, the “Currency Value” menu item is highlighted.
5. N
ON
-C
URRENCY
V
ALUE
. This function allows user to enter the non-currency
value for the selected cassette. This field accepts the dollars and cents
(Example: ‘20’ or ‘3.25’). The maximum length for the whole dollar portion
is limited to two (2) digits. The valid value is from ‘0.00’ to ‘99.99’. If the
“Media Type” is set to “Currency”, this menu item will be grayed out and
the value is set to ‘0.00’. If there is no value sent from the device, the
default value is set to ‘0.00’. Press <5> on the keypad to enter the value.
Press when completed.
6. M
EDIA
W
IDTH
(
IN MILLIMETERS
). This function allows user to enter the
width of the media for the selected cassette. If there is no value sent from
the device, the default value is set to ‘66’ (USD media width). Press <6> on
the keypad to enter the value. Press when completed.
7. M
EDIA
L
ENGTH
(
IN MILLIMETERS
). This function allow user to enter the
length of the media for the selected cassette. If there is no value sent from
the device, the default value is set to ‘156’ (USD media length). Press <7>
on the keypad to enter the value. Press when completed.
8. Save Cassette Settings. This function allows user to save all the displayed
settings. Press <8> on the keypad to inject the settings into the cassette.