Spectra Precision MobileMapper Field & Office Software - Manual (Page 48)

English
40
GNSS Toolbox
GNSS Toolbox is a software application that is separate from
MobileMapper Field. It is used to control and monitor GNSS
reception in MobileMapper 6.
From the Start screen, tap on the GNSS Tool Box icon or tap
on GNSS Tool Box on the Today screen. This opens the tool
box main menu in which four options are listed:
• GNSS Settings
• GNSS Status
• Reset
• About
GNSS Settings
• Open the GNSS Tool Box and double-tap on GNSS Settings.
This opens a new window where you can make the
following settings:
– Tracking mode: Only GPS L1 is available with
MobileMapper 6.
– Use SBAS check box: Check this box to enable SBAS
reception. When this box is cleared, SBAS reception is
disabled.
• Tap ok to confirm your choices and return to the GNSS
Tool box main menu.
GNSS Status • Open the GNSS Tool Box and double-tap on GNSS Status.
This opens a three-tab window.
The default Position tab shows the three coordinates of the
current position, as computed by the receiver, as well the
number of satellites used, the current PDOP value and the
position computation mode used.