Spectra Precision MobileMapper Field & Office Software - Manual (Page 14)

English
6
• [8]: Current zoom setting. The current value of scale is
provided, based on the currently selected unit.
• [9]: Area showing a map of the working site (map screen).
Tapping anywhere within this area will return the
horizontal coordinates of the tapped point (expressed in
the coordinate system used in the job). Tap
ok to close the
window providing these coordinates.
• [10]: Zoom in/out buttons
• [11]: Battery status
• [12]: Volume setting
• [13]: Phone status
• [14]: Connectivity status.
• [15]: Microsoft Windows button; Used to switch between
the Microsoft Start screen and the MobileMapper Field
application when MobileMapper Field is running.
• [16]: Takes you to the Microsoft Home screen by
minimizing the MobileMapper field window. Tap on the
MobileMapper Field icon ( ) at the bottom of the screen
to return to MobileMapper Field.
• [17]: The “FILTER” warning appears in red characters
whenever the current PDOP is greater than the max.
permitted value. The max. PDOP value can be set in
Menu>Options, Filter tab. When “FILTER” is displayed, no
data collection is possible (
Log button greyed). An
abnormally high PDOP is usually due to a too low number
of satellites used.
Dragging the Map
on the Screen
Use one of the following two methods.
• For receivers having an ESC key, press this key to move the
arrow symbol representing your current position back to
the center of the map screen. Following this action, the
whole screen is updated to reflect the map shift.
• Drag the stylus in the desired direction.
Because some receivers have no ESC key (e.g. MobileMapper
10), a routine is implemented bringing your current position
Status
Gives access to three tabs describing the current GPS
reception status, in digital (Position) or graphical (Satel-
lites, Signal) form. (In fact the GNSS Status function from
the GNSS Toolbox.)
About Displays the installed version of MobileMapper Field.
Exit Quits MobileMapper Field.
Menu Option Function