Spectra Precision MobileMapper Field & Office Software - Manual (Page 10)

English
2
Installing MobileMapper Field
This section describes how to install MobileMapper Field
from the CD provided, using an office computer.
If Windows XP (or older OS version) is used on your computer,
you first need to install Microsoft Active Sync on your office
computer.
If Windows Vista or Windows 7 is used, you don’t normally
need to install an additional program on your computer.
However, if the installation of the MobileMapper Field
software fails, you will have first to install Windows Mobile
Device Center and then resume the installation of
MobileMapper Field.
The latest versions of ActiveSync and Device Center can be
downloaded from
http://www.microsoft.com/en-us/download/
details.aspx?id=14 for Windows Mobile Device Center and
http://www.microsoft.com/en-us/download/
details.aspx?id=15
for ActiveSync.
If you are upgrading MobileMapper Field, Spectra Precision
recommends you first uninstall the previous version of
MobileMapper Field from the receiver using
Start, Settings,
System, Remove Programs.
Installation
Procedure
• For MobileMapper 120:
– Place the receiver on the docking station
– Connect the docking station to your office computer
using the USB data cable provided.
• For MobileMapper 20: Connect the receiver to your office
computer using the USB data cable provided.
• Turn on the receiver.
• MobileMapper 120: To prevent the risk of corrupting the
registry during installation, all running processes and
background services, including the GNSS Service must be
stopped first. To stop the GNSS Service, run GNSS
Toolbox, click on
Turn Off GNSS and tap on the Yes button.