Seed Hawk Raven 2011 - Manual (Page 79)

4
Manual No. 016-3001-003 69
Navigating the Viper Pro Interface
Tabs
The information displayed in the Map area is dependent upon the selected tab.The following tabs are available
while a job is in progress:
• Main
• Guide
• Rx+Cov+Scout
• Rx
• Cov
• Scout
• Section Control (SCT)
Tabs displayed in gray are currently unavailable for use and the Main tab is the only tab available when no jobs
are in progress on the Viper Pro console. Touching available tabs during a job will display and access
information for the current field application. The Section Control tab is only available if the required hardware
has been installed and the feature has been enabled for the current job. See the Tabs section on page 76 for a
detailed description of each tab.
Application Rates
The Application Rate area displays the target rate (R
T
) and actual rate (R
A
) and the bin or tank level for each
product currently detected on the CANbus.
Note:
Only products detected on the CANbus will appear in the Application Rates area.