Seed Hawk Raven 2011 - Manual (Page 233)

Manual No. 016-3001-003 223
To view weather information, press the Display Data button on the lower right hand side of the Viper, and then
touch in the data area to toggle to the weather information.
Note:
If the Wind Direction heading displayed in the Weather Information does not appear as expected,
re-initialize the Weather Station as described in the Comm Port Configuration section on
page 222.
Press the Record button to log the current weather conditions into the Rbin Application Report. The record
button will only display when in a job. The record button may be pressed as many times as desired during the
job, but only the information from the last button press, before the job is closed will be recorded into the Rbin
Application Report.