Display units configuration – Seed Hawk Raven 2011 User Manual
Page 109
4
Manual No. 016-3001-003
99
Navigating the Viper Pro Interface
Loading a Saved Profile
1.
Select Menu, then Setup, Local, Profile, and Load Profile. The Select Profile screen displays.
2.
Select a profile from the list.
3.
Press OK. A confirmation screen displays.
4.
Press OK. Viper restarts with the new profile loaded.
Display Units Configuration
The following systems are available for displaying measure and rate on the Viper Pro:
•
English: This setting displays units in feet, miles, ounces, etc.
•
Metric: This setting displays units in meters, kilometers, liters, etc.
Note:
The Viper Pro default setting is English.
Setting the Unit of Measurement
1.
Select Menu, then Setup, Local, and Units. The Display Units screen displays.
2.
Select the desired system of measurement for use with the Viper Pro.
3.
Press OK. Viper saves the setting.