Seed Hawk Raven 2011 - Manual (Page 130)

Chapter 5
120 Seed Hawk™ Viper Pro™ Installation & Operation Manual
17. Select the appropriate rate information file for rate conversion and press Next. The Rate Conversion screen
displays.
Rate Conversions may be used to calibrate the prescription map for the application. For example, a value of
‘2’ may be used to double the prescription rates on the selected prescription map.
Note:
The Rate Conversion value must be greater than zero. In most applications, the conversion factor
will be left at the default setting of 1.0
The Rate Conversions may also be used to convert a prescription map from liters or ounces to gallons, or
gallons to ounces or liters. Press the Common Factors button to view some common rate conversion
values.
18. Enter a conversion factor in the Rate field and press OK. Viper loads the new job information into the
console.
Pausing a Job
Select Menu, then Pause Job. Viper pauses the job.
Restarting a Paused Job
Select Menu, then Cont Job. Viper restarts the paused job.
Existing Jobs
When you open an existing job, you have two options for that job. You can:
• View the existing job
• Add to the existing job
Viewing an Existing Job
When you view an existing job, you cannot add to the job. You would typically use this feature to view
information for a saved job.
1. Press Menu, then Start Job, From File, and View Only. The Select Existing Job File screen opens.
2. Select a job from the list and press OK. Viper opens the job.
3. Press Menu, Close Job to close the job when you are finished viewing it.