Blade illustrations – Brocade DCX 8510-4 Backbone Hardware Reference Manual User Manual
Page 48

Power Consume Factor: -1
Factory Part Num: 60-1000888-05
Factory Serial Num: ANN2524F01N
Manufacture: Day: 7 Month: 6 Year: 2010
Update: Day: 29 Month: 3 Year: 2011
Time Alive: 229 days
Time Awake: 0 days
ID: BRD0000CA
Part Num: SLKWRM0000X4S
WWN Unit: 2
Header Version: 2
Power Consume Factor: -1
Factory Part Num: 60-1000888-05
Factory Serial Num: ANQ0417F03P
Manufacture: Day: 7 Month: 6 Year: 2010
Update: Day: 29 Month: 3 Year: 2011
Time Alive: 229 days
Time Awake: 0 days
Chassis Factory Serial Num: ANP2523F00E
DCX-4_130:admin>
Determining the status of a port or application blade
Use the following procedure to determine the status of a port or application blade.
1. Check the LEDs on the blade.
on page 48.
The LED patterns may temporarily change during POST and other diagnostic tests. For information
about how to interpret the LED patterns, refer to the table following the blade descriptions.
2. Check the blade status by entering slotShow.
Blade illustrations
This section illustrates the following port blades:
• The FC8-32E port blade.
• The FC8-48E port blade.
• The FC8-64 port blade.
• The FC16-32 port blade.
• The FC16-48 port blade.
• The FC16-64 port blade.
• The FS8-18 encryption blade.
• The FX8-24 extension blade.
Determining the status of a port or application blade
48
Brocade DCX 8510-4 Backbone Hardware Reference Manual
53-1002177-07