Brocade DCX 8510-4 Backbone Hardware Reference Manual - Manual (Page 124)

Supported optics, speeds, cables, and distances (Continued) TABLE 25
Transceiver
type Form
factor Speed Multimode
media (62.5
microns)
(OM1) Multimode
media (50
microns)
(OM2)
Multimode
media (50
microns)
(OM3)
Multimode
media (50
microns)
(OM4)
Single
Mode
Media (9
microns)
SFP+ 8 Gbps N/A N/A N/A N/A 10 km (6.2
mi.) or 40
km (24.8
mi.)
SFP+ 10 Gbps N/A N/A N/A N/A 10 km (6.2
mi.)
SFP+ 16 Gbps N/A N/A N/A N/A 10 km (6.2
mi.)
Qualified cables for the FC8-64 port blade
The following table lists the third-party cables that have been qualified for use with the mSFP
transceivers in the FC8-64 high density port blade.
Qualified cables for mSFP connections for the FC8-64 high density port blade TABLE 26
Description Length Corning part number Molex part
number Amphenol part
number
Patch cables - mSFP to LC S50502S5120XXXM (XXX
= length) 943-99865-1XXXX
(XXXX = length)
mSFP LC - standard LC,
duplex, multi-mode, OM3,
50/125 1 m S50502S5120001M 106273-0525 943-99865-10001
mSFP LC - standard LC,
duplex, multi-mode, OM3,
50/125 2 m S50502S5120002M 106273-0526 943-99865-10002
mSFP LC - standard LC,
duplex, multi-mode, OM3,
50/125 3 m S50502S5120003M 106273-0527 943-99865-10003
mSFP LC - standard LC,
duplex, multi-mode, OM3,
50/125 5 m S50502S5120005M 106273-0528 943-99865-10005
mSFP LC - standard LC,
duplex, multi-mode, OM3,
50/125 10 m S50502S5120010M 106273-0529 943-99865-10010
Qualified cables for the FC8-64 port blade
124 Brocade DCX 8510-4 Backbone Hardware Reference Manual
53-1002177-07