Brocade Fabric OS Encryption Administrator’s Guide Supporting NetApp Lifetime Key Manager (LKM) and KeySecure Storage Secure Key Manager (SSKM) Environments (Supporting Fabric OS v7.2.0) User Manual
Page 56
38
Fabric OS Encryption Administrator’s Guide (LKM/SSKM)
53-1002925-01
Creating an encryption group
2
FIGURE 20
Select Key Vault dialog box
Using this dialog box, you can select a key vault for the encryption group that contains the
selected switch. Prior to selecting your Key Vault Type, the selection is shown as None. The
dialog box contains the following information:
•
Key Vault Type:
If an encryption group contains mixed firmware nodes, the Encryption Group Properties
Key Vault Type name is based on the firmware version of the group leader. Options are:
•
NetApp Link Key Manager (LKM)
•
RSA Data Protection Manager (DPM)
•
HP Secure Key Manager (SKM)
•
Thales e-Security keyAuthority (TEKA
•
Tivoli Key Lifecycle Manager (TKLM)
•
Key Management Interoperability Protocol (KMIP)
8. Select NetApp Link Key Manager (LKM) as the Key Vault Type. Proceed to
vault settings for NetApp Link Key Manager (LKM/SSKM)”
Configuring key vault settings for NetApp Link Key Manager
(LKM/SSKM)
The following procedure assumes you have already configured the initial steps in the Configure
Switch Encryption wizard. If you have not already done so, go to