Brocade Fabric OS Encryption Administrator’s Guide Supporting NetApp Lifetime Key Manager (LKM) and KeySecure Storage Secure Key Manager (SSKM) Environments (Supporting Fabric OS v7.2.0) - Manual (Page 144)

126 Fabric OS Encryption Administrator’s Guide (LKM/SSKM)
53-1002925-01
Steps for connecting to an LKM/SSKM appliance
3
Encryption Node (Key Vault Client) Information:
Node KAC Certificate Validity: Yes
Time of Day on the Switch: Wed Mar 17 08:14:36.881902 GMT 2
010
Client SDK Version: OpenKey Reference Lib 2.0.9
Client Username: N/A
Client Usergroup: N/A
Connection Timeout: 20 seconds
Response Timeout: 20 seconds
Connection Idle Timeout: N/A
Key Vault(s) is/are connected. Key retrieval and archival verified through
direct link.
Please make sure Link Key is established through DH challenge-response for DEK
operations to succeed.
Authentication Quorum Size: 0
Authentication Cards not configured
NODE LIST
Total Number of defined nodes: 3
Group Leader Node Name: 10:00:00:05:1e:39:7c:65
Encryption Group state: CLUSTER_STATE_CONVERGED
Crypto Device Config state: In Sync
Encryption Group Config state: In Sync
Node Name IP address Role
10:00:00:05:1e:39:7c:65 10.32.73.22 GroupLeader (current node)
EE Slot: 3
SP state: Online
EE Slot: 10
SP state: Online
EE Slot: 12
SP state: Online
10:00:00:05:1e:53:8b:15 10.32.73.23 MemberNode
EE Slot: 0
SP state: Online
10:00:00:05:1e:53:b3:c2 10.32.73.25 MemberNode
EE Slot: 0
SP state: Online
Launching the NetApp DataFort Management Console
The NetApp DataFort Management Console (DMC) must be installed on your PC or workstation to
complete certain procedures described in this appendix. Refer to the appropriate DMC product
documentation for DMC installation instructions. After you install DMC, complete the following:
1. Launch the DMC.
2. Click the Appliance tab on the top panel.
3. Add the NetApp LKM/SSKM appliance IP address or hostname.
4. Right-click the added IP address and Log in to the NetApp LKM/SSKM key vault.