Brocade Fabric OS Encryption Administrator’s Guide Supporting NetApp Lifetime Key Manager (LKM) and KeySecure Storage Secure Key Manager (SSKM) Environments (Supporting Fabric OS v7.2.0) - Manual (Page 155)

Fabric OS Encryption Administrator’s Guide (LKM/SSKM) 137
53-1002925-01
Zoning considerations
3
Creating an initiator - target zone
NOTE:
• NWWN based zoning of initiator and targets is not supported with Frame redirection.
• The Initiator-Target zone should be created before you create the container. Otherwise, the
frame redirection zone creation for the Initiator-Target pair will fail during a commit.
1. Log in to the group leader as Admin or FabricAdmin.
2. Determine the initiator PWWN. Enter the nsshow command to view the devices connected to
this switch. In the following example, the port name 10:00:00:00:c9:2b:c9:3a is the initiator
PWWN.
FabricAdmin:switch> nsshow
{
Type Pid COS PortName NodeName TTL(sec)
N 010600; 2,3; 10:00:00:00:c9:2b:c9:3a ;20:00:00:00:c9:2b:c9:3a; na
NodeSymb: [35] "Emulex LP9002 FV3.82A1 DV5-4.81A4 "
Fabric Port Name: 20:06:00:05:1e:41:9a:7e
Permanent Port Name: 10:00:00:00:c9:2b:c9:3a
Port Index: 6
Share Area: No
Device Shared in Other AD: No
Redirect: No
The Local Name Server has 1 entry }
The nsshow command shows all devices on the switch, and the output can be lengthy. To
retrieve only the initiator PWWN, do a pattern search of the output based on the initiator Port
ID (a hex number). In the following example, The PID is 010600, where 01 indicates the
domain and 06 the port number.
FabricAdmin:switch> nsshow | grep 0106
N 010600; 2,3; 10:00:00:00:c9:2b:c9:3a ;20:00:00:00:c9:2b:c9:3a; na
3. Determine the target PWWN. Enter the nsscamshow command to review the remote switch
information. In the following example, the port name 20:0c:00:06:2b:0f:72:6d is the target
PWWN.
FabricAdmin:switch> nscamshow
nscamshow for remote switches:
Switch entry for 2
state rev owner
known v611 0xfffc01
Device list: count 13
Type Pid COS PortName NodeName
NL 0208d3; 3; 20:0c:00:06:2b:0f:72:6d ;20:00:00:06:2b:0f:72:6d;
FC4s: FCP
PortSymb: [55] "LSI7404XP-LC BR A.1 03-01081-02D FW:01.03.06 Port 1 "
Fabric Port Name: 20:08:00:05:1e:34:e0:6b
Permanent Port Name: 20:0c:00:06:2b:0f:72:6d
Port Index: 8
Share Area: No
Device Shared in Other AD: No
Redirect: No
Alternately use nscamshow | grep target PID to obtain the target PWWN only.
FabricAdmin:switch> nscamshow | grep 0208