Brocade Fabric OS Encryption Administrator’s Guide Supporting NetApp Lifetime Key Manager (LKM) and KeySecure Storage Secure Key Manager (SSKM) Environments (Supporting Fabric OS v7.2.0) - Manual (Page 122)

104 Fabric OS Encryption Administrator’s Guide (LKM/SSKM)
53-1002925-01
Viewing and editing encryption group properties
2
FIGURE 77 Encryption Group Properties dialog box - Security tab
The Security tab contains the following information:
• Master Key Status: Shown as Not used when LKM/SSKM is the key vault type.
• System Cards: Identifies if the use of a system card is required for controlling activation of the
encryption engine. You must indicate if cards are required or not required. If a system card is
required, it must be read by the card reader on the switch.
• Authentication Cards, which identifies if one or more authentication cards must be read by a
card reader attached to a Brocade Network Advisor PC to enable certain security-sensitive
operations.
• Authentication Cards quorum size selector: Determines the number of registered
authentication cards needed for a quorum. The number should always be one less than the
actual number registered.
NOTE
When registering authentication cards, you must register the defined quorum size plus one.
• Registered Authentication Cards table: Lists the registered authentication cards by Group Card
number, Card ID, the name of the person to which the card is assigned, and optional notes.
• Register from Card Reader button: Launches the Add Authentication Card dialog box.
• Register from Archive button: Launches the Add Authentication Card dialog box.
• Deregister button: Deregisters authentication cards, thus enabling them to be removed from
the switch and the database.