beautypg.com

Removing the fan tray – Brocade TurboIron 24X Series Hardware Installation Guide User Manual

Page 56

background image

46

Brocade TurboIron 24X Series Hardware Installation Guide

53-1002981-01

Replacing the fan tray

5

CAUTION

Never leave tools inside the device.

Removing the fan tray

Use the following procedures to remove the fan tray from TurboIron 24X devices.

Figure 22

shows the location of the fan tray.

FIGURE 22

TurboIron 24X fan tray location

1. Disconnect the power cord from the power supply.

2. Loosen the two captive screws on the front plate of the fan tray and slide the tray out of the

device as shown in

Figure 23

.

FIGURE 23

Removing the fan tray

3. Insert the replacement fan tray, as shown in

Figure 24

, and push it all the way into the slot to

connect the interface.

NOTE

Ensure that the fan tray fits between the locating slides in the device.

4. Tighten the two captive screws to secure the tray in place.

1

Fan Tray

1