beautypg.com

Installation precautions, General precautions – Brocade TurboIron 24X Series Hardware Installation Guide User Manual

Page 21

background image

Brocade TurboIron 24X Series Hardware Installation Guide

11

53-1002981-01

Installation precautions

2

Installation precautions

Follow these precautions when installing a Brocade device.

General precautions

CAUTION

Do not install the device in an environment where the operating ambient temperature might
exceed 40°C (104°F).

CAUTION

Make sure that air flow around the front, sides, and back of the device is not restricted.

CAUTION

Never leave tools inside the device.

CAUTION

Use the erase startup-config command only for new systems. If you enter this command on a
system you have already configured, the command erases the configuration. If you accidentally
do erase the configuration on a configured system, enter the write memory command to save the
running configuration to the startupconfig file.

CAUTION

Changes or modifications made to this device that are not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.

DANGER

All fiber-optic interfaces use Class 1 lasers.