Yokogawa Removable Chassis DX1000N - Manual (Page 82)

80
IM 04L41B01-02E
Menu tab *2
Alarm > Basic settings
Setup Item Selectable Range or Selections Default Value Setting
Reflash
Rate of change > Decrease
Rate of change > Increase
Indicator On/Off/On-1s *3 /On-2s *3
1 to 32
1 to 32
Hold/Nonhold
Off
1
1
Nonhold
Alarm > Switch, Relay
Setup Item Selectable Range or Selections Default Value Setting
Internal Switch > AND
Relay > AND
Relay > Action
Relay > Hold
Relay > Relay Action on ACK
*1
None/S01/S01-S02/.../S01-S29/S01-S30
None/I01/I01-I02/.../I01-I06 (Depends on the option.)
Energize/De_energ
Hold/Nonehold
Normal/Reset None
None
Energize
Nonhold
Normal
Alarm > Hysteresis
Setup Item Selectable Range or Selections Default Value Setting
Meas CH > High/Low
Meas CH > Delta High/Low
Math CH > High/Low 0.0 to 5.0
0.0 to 5.0
0.0 to 5.0 0.5
0.0
0.0
A/D, Memory
Setup Item Selectable Range or Selections Default Value Setting
Without /AS1
Scan interval > Scan mode
Normal > Scan interval
Normal > A/D integrate
Fast
† > Scan interval
Fast † > A/D integrate
Normal/Fast
125ms/250ms (DX1002, DX1002N, DX1004, DX1004N)
1s/2s/5s (DX1006, DX1006N, DX1012, DX1012N)
Auto/50Hz/60Hz/100ms
25ms (DX1002, DX1002N, DX1004, DX1004N)
125ms (DX1006, DX1006N, DX1012, DX1012N)
600Hz
Normal
125ms
1s
Auto
25ms
125ms
600Hz
Memory > Data kind Display/E+D/Event Display
With /AS1 *3
The Scan interval items are the same as on a DX without the /AS1 option.
Memory > Data kind
Display/Event Display
†: You cannot select this option on a DX with external input channels (/MC1) or when the multi batch function (/BT2) is in use.
Signature (/AS1 option) *3
Setup Item Selectable Range or Selections Default
Value
Setting
Process type Batch/Continue Batch
Sign from recorder Off/Sign1/Sign1+2/Sign1+2+3 Off
Signature at batch stop On/Off Off
FTP transfer at signing On/Off Off
Burnout, RJC
Setup Item Selectable Range or Selections Default Value Setting
First-CH, Last-CH Channel number 001
Burnout set > Mode Off/Up/Down Off
RJC > Mode
RJC > Volt Internal/External
–20000 to 20000µV Internal
0
Setup Items and Default Values