Yokogawa Removable Chassis DX1000N - Manual (Page 5)

3
IM 04L41B01-02E
Thank you for purchasing the Daqstation DX1000/DX1000N
(DX).This manual describes the basic operating procedures and
installation and wiring procedures of the DX1000/DX1000N. To
ensure correct use, please read this manual and the manuals
below thoroughly before beginning operation.
Paper Manual
Manual Title Manual No.
DX1000/DX1000N Operation Guide IM 04L41B01-02E
This manual. It is also provided in the CD.
Control of Pollution Caused by the Product IM 04L41B01-91C
Gives a description of pollution control.
Electronic Manuals Provided on the Accompanying CD
Manual Title Manual No.
DX1000/DX1000N Operation Guide IM 04L41B01-02E
This is the electronic version of the paper manual.
DX1000/DX1000N User’s Manual IM 04L41B01-01E
Describes how to use the DX. The communication and
network functions, custom display functions, and some of the
options are excluded.
DX1000/DX1000N/DX2000 IM 04L41B01-03E
Multi Batch (/BT2) User’s Manual
Describes how to use the multi batch function (/BT2 option ).
DX1000/DX1000N/DX2000 Custom IM 04L41B01-04E
Display User’s Manual
Describes how to use the custom display function.
DX1000/DX1000N/DX2000 Advanced
Security (/AS1) User’s Manual IM 04L41B01-05EN
Describes how to use the advanced security function
(/AS1 option).
DX1000/DX1000N/DX2000 IM 04L41B01-17E
Communication Interface User’s Manual
Describes how to use the communication functions using the
Ethernet and serial interfaces.
DX1000/DX1000N/DX2000 IM 04L41B01-18E
EtherNet/IP Communication Interface User’s Manual
Describes how to use communication functions through the
EtherNet/IP interface.
DX1000/DX1000N/DX2000 IM 04L41B01-19E
PROFIBUS-DP (/CP1) Communication Interface User’s Manual
Describes how to use communication functions through the
PROFIBUS-DP interface (/CP1 option).
DAQSTANDARD Manuals
All manuals other than IM 04L41B01-66EN are contained in the
DAQSTANDARD CD.
Manual Title Manual No.
DAQSTANDARD Viewer User’s Manual IM 04L41B01-63EN
DAQSTANDARD Hardware Configurator
User’s Manual IM 04L41B01-64EN
DAQSTANDARD DX-P Hardware
Configurator User’s Manual IM 04L41B01-65EN
Installing DAQSTANDARD IM 04L41B01-66EN
Notes
• The contents of this manual are subject to change without prior
notice as a result of continuing improvements to the instrument’s
performance and functions.
• Every effort has been made in the preparation of this manual to
ensure the accuracy of its contents. However, should you have
any questions or find any errors, please contact your nearest
YOKOGAWA dealer.
• Copying or reproducing all or any part of the contents of this
manual without YOKOGAWA’s permission is strictly prohibited.
• The TCP/IP software of this product and the document
concerning the TCP/IP software have been developed/created
by YOKOGAWA based on the BSD Networking Software,
Release 1 that has been licensed from the Regents of the
University of California.
Revisions
1st Edition: December 2005
2nd Edition: October 2006
3rd Edition: April 2007
4th Edition: December 2007
5th Edition: November 2008
6th Edition: March 2010
7th Edition: December 2010
Trademarks
• vigilantplant, DAQSTATION, Daqstation, and DXAdvanced are
registered trademarks of Yokogawa Electric Corporation.
• Microsoft and Windows are registered trademarks or trademarks
of Microsoft Corporation in the United States and/or other
countries.
• Adobe and Acrobat are registered trademarks or trademarks of
Adobe Systems Incorporated.
• Kerberos is a trademark of the Massachusetts Institute of
Technology (MIT).
• Company and product names that appear in this manual are
registered trademarks or trademarks of their respective holders.
• The company and product names used in this manual are not
accompanied by the registered trademark or trademark symbols
(® and ™).
7th Edition: December 2010 (YK)
All Rights Reserved, Copyright © 2005, Yokogawa Electric Corporation