Yokogawa Removable Chassis DX1000N - Manual (Page 27)

2
IM 04L41B01-02E
. Press the CF card eject button. When you eject the CF card, the CF card icon
disappears.
Eject button
Press the eject button in until it clicks.
The eject button stops at depressed position.
Pinch the left and right sides of the CF card
and remove it.
6. Close the operation cover.
Operation complete.
1. Press MENU (to switch to setting mode), hold down FUNC for 3 s (to switch to
basic setting mode), select the File/Initialize tab > Media eject > CF *, and press
DISP/ENTER.
* Select CF if you have a choice between CF and USB .
The message “Media can be removed safely” appears.
2. Open the operation cover.
3. Press the CF card eject button. Remove the CF card.
4. Close the operation cover.
Operation complete.
Note
If you remove the CF card without carrying out the media eject procedure, the message “Media
was removed compulsorily” appears. Remove the CF card by carrying out the procedure above
to prevent damaging the data that is stored.
Basic Operation