Names of parts, Front view – Yokogawa Removable Chassis DX1000N User Manual
Page 12
10
IM 04L41B01-02E
Names of Parts
Front View
USB
CF CARD
NO.
Do not remove the cover.
Repair by trained personnel only.
START
USER FUNC
ESC MENU
STOP
Key panel opened
Front cover opened
LCD
Display various operation displays
such as the trend display as well as
setup displays.
Power indicator
Illuminates in red when the
power is turned ON. Illuminates
in green while memory
sampling is in progress.
Power switch
Not available on the DX1002N,
DX1004N, DX1006N, and
DX1012N.
USB port
A USB port conforming to Rev.
1.1.
Remote control sensor
(/KB1 and /KB2 options)
Receives infrared light from the
remote control terminal.
Label (front of the key panel cover)
Write arbitrary labels for your
convenience.
Front cover (key panel)
Open the front cover by pulling the
cover while holding down the tab at
the center of the upper section of the
cover.
When closing the front cover, press
the front cover in until the tab at the
center of the upper section of the
cover is all the way up. If the front
cover is not closed completely, the
water and dust proof capability may
be impaired.
CF card slot
Lock key
CF card access indicator
CF card eject button
Used when ejecting the CF card.
Key panel cover
Open the cover by pinching the
left tab and pulling forward.
Door lock key (included)
Insert the pin in the left hole to lock.
Insert the pin in the right hole to unlock.
DISP/
ENTER
6
9
7
8
10
11
12
1
2
3
4
5
CAUTION