Yokogawa Removable Chassis DX1000N - Manual (Page 28)

26
IM 04L41B01-02E
Saving the Setup Data
In this example, we will save the setup data to a file named “SF2” on the CF card.
1. Display the operation mode screen.
2. Press MENU once to display the setting menu.
3. Press the right arrow key once to select the File tab.
4. Press the down arrow key four times.
Select Save settings.
. Press DISP/ENTER once.
6. Press the Input soft key once.
. Enter “SF2” for the file name.
For the input procedure, see “Entering Values and Characters” on page 17.
8. Press DISP/ENTER once. The message “Data are being saved to media”
appears, and the setup data is saved.
9. Press ESC or MENU twice to return to the operation mode screen.
On a DX with advanced security (/AS1 option; release number 4 or later):
Press ESC or MENU twice to display a confirmation screen. To return to the
operation mode screen, select Yes, and press DISP/ENTER once.
Operation complete.
Basic Operation