Yokogawa Removable Chassis DX1000N - Manual (Page 22)

20
IM 04L41B01-02E
. Press DISP/ENTER once.
Select First-CH.
6. Press the +1 soft key once to set First-CH and Last-CH to 2.
. Press the down arrow key once to move the cursor to Mode.
8. Press the TC soft key once. The cursor moves to Range, and the changed item is
displayed in yellow.
Select TC.
9. Press the Next soft key.
10. Press the T soft key once. The cursor moves to Span_L.
11. Press the Input soft key once.
Display the Span_L setting window.
12. Enter 0.0 in the Span Lower box.
Select the input position: Press the right arrow key once to move the cursor in the
text box to the right.
Delete the minus sign: Press the up arrow key once to delete the minus sign.
Delete the 2 and 0 in the same way.
Enter the input:
Press DISP/ENTER once. Span_L is set, and the cursor
moves to Span_U .
Cancel the setting: Press ESC before pressing DISP/ENTER (entering the
input).
13. Enter 400.0 in the Span Upper box.
See step 12 for the procedure.
Basic Operation