Yokogawa Removable Chassis DX1000N - Manual (Page 24)

22
IM 04L41B01-02E
Operation Example in the Basic Setting Mode: Changing the Scan Interval
In this example, we will change the scan interval. Here, the scan interval on the DX1012
is changed to 2 s. The selectable scan intervals are different on the model, but the
procedure is the same.
Type T
thermocouple Channel 2
Measures every 2 s
DX
1. Display the operation mode screen.
2. Press MENU once to display the setting menu.
3. Hold down FUNC for at least 3 s.
Alternatively, you can execute the following procedure to switch to Basic Setting mode.
Use the
up or down arrow key to select Basic setting mode on the Menu tab, and
press DISP/ENTER .
A confirmation window will appear. Select Yes , and press DISP/ENTER .
Display the Basic Setting Mode menu.
Basic Operation