Yokogawa Removable Chassis DX1000N - Manual (Page 8)

6
IM 04L41B01-02E
Standard Accessories
The standard accessories below are supplied with the instrument.
Check that all contents are present and undamaged.
9
ID No.
1 2 4 3
6 7 5
32
MB
8. One of these power cord types is supplied according
/H5F /H5D /H5R
/H5H /H5J
to the instrument’s suffix code.
No. Name Part Number/
Model
Qty. Notes
1 Terminal screws E9655FX 5 M4 (spares)
2 Mounting brackets B9900BX 2 For panel mounting
Except for the /H5[ ]
models.
3 Door lock key B8706FX 2 –
4 DAQSTANDARD DXA120 1 CD. Contains the
software and user’s
manuals.
5 DX1000/DX1000N
Operation Guide (this
manual) IM 04L41B01-02E 1 A4 size
DXA120 Installing
DAQSTANDARD IM 04L41B01-
066EN 1
Control of Pollution
Caused by the
Product IM 04L41B01-91C 1
6 User’s Manuals
for the DX1000/
DX1000N/DX2000 B8706ZZ 1 CD. Contains the
PDF file of the user’s
manual.
7 CF card B8706NQ 1 128 MB (The size and
model may change.)
8 Power cord A1006WD 1 Supplied only for
models with the /H5D
option. Maximum
rated voltage: 125 V
A1009WD 1 Supplied only for
models with the /H5F
option. Maximum
rated voltage: 250 V
A1024WD 1 Supplied only for
models with the /H5R
option. Maximum
rated voltage: 250 V
A1054WD 1 Supplied only for
models with the /H5J
option. Maximum
rated voltage: 250 V
A1064WD 1 Supplied only for
models with the /H5H
option. Maximum
rated voltage: 250 V
No. Name Part Number/
Model
Qty. Notes
9 Remote control
terminal 438227 1 Remote controller.
Supplied only for
models with the /KB1
option. With two AA
alkaline batteries and
labels for the remote
control terminal.
Optional Accessories (Sold Separately)
The following optional accessories are available for purchase
separately. If you make an order, make sure that all contents
are present and undamaged. For information about ordering
accessories, contact the dealer from which you purchased the DX.
No. Name Model Minimum Notes
Q’ty
1 CF card 772093 1 512 MB
772094 1 1 GB
772095 1 2 GB
2 CF card adapter 772090 1 –
3 Shunt resistor 415920 1 250 Ω ± 0.1%
(for screw input terminal)
415921 1 100 Ω ± 0.1%
415922 1 10 Ω ± 0.1%
4 Shunt resistor
(for clamped input
terminal) 438920 1 250 Ω ± 0.1%
438921 1 100 Ω ± 0.1%
438922 1 10 Ω ± 0.1%
5 Mounting brackets B9900BX 2 –
6 Door lock key B8706FX 1 –
7 Remote control terminal 438227 1 Remote
controller.
8 Validation document – 1 Electronic file
Style number, release number, and firmware
version number of the DX
Style number: This is the DX hardware number that is indicated
on the name plate.
Release number: This is the DX firmware number that is indicated
on the name plate. The number corresponds to
the integer part of the firmware version number.
Example: If the firmware version number is 2.01, the release
number is 2.
Firmware version number: This number is displayed on the DX
system information screen. For the procedure,
see section 2.5, “Viewing the DX Information”
in the DX1000/DX1000N User’s Manual (IM
04L41B01-01E).
MODEL
FREQUENCY
NO.
SUFFIX
SUPPLY
STYLE
H
2 2
S
Style number
Release number