Yokogawa YVP20S - Manual (Page 73)

8-4
<8. SETUP WIZARD>
IM 21B04C50-01E
If Limit Searching and Auto Tuning is performed successfully, a tuning result dialog will be
shown for user’s confirmation.
If Accept is clicked, the new servo parameters will apply to the system. Otherwise, the
original servo parameters will be restored to the device.
Double acting specific parameters are applicable only for double acting actuator type.
Figure 8.4 Tuning Result
When the mechanical limits have been found and the tuning is complete, the result is
displayed (Figure 8.5).
Figure 8.5 Tuning Wizard Succeeded or Failed
If the self calibration and autotuning procedures are unsuccessful, there will be messages
shown as in Figure 8.6
Figure 8.6 Tuning Wizard Error/Warning Messages