2 setting device as lm or basic device, Setting device as lm or basic device -5, Warning – Yokogawa YVP20S User Manual
Page 66
7-5
IM 21B04C50-01E
<7. INTEGRATED VALVE INTERFACE (IVI)>
7.1.2
Setting Device as LM or Basic Device
This feature is available only when the opened device has the Link Master(LM) capability.
WARNING
The procedures will reboot the device. Check that the device is isolated from the operating
process.
Figure 7.5 Change to Basic Device
Clicking Yes will set device as Link Master or Basic device. This procedure will set the NMIB
parameter BootOperatFunctionalClass to LM or Basic first, then restart the device
processor.
After the operation successes, the color of the letter ‘LM’ on the device icon on the device
list will change.