Yokogawa YVP20S - Manual (Page 12)

2-1
IM 21B04C50-01E
<2. INTRODUCTION TO ValveNavi AND TO YVP>
2. INTRODUCTION TO ValveNavi
2.1 What is ValveNavi?
ValveNavi is a Windows software tool that makes it easy to configure, calibrate, and operate
Foundation fieldbus pneumatic control valve positioners YVP110 with internal process
control and limit switches. It fully supports the Foundation fieldbus specifications.
2.2 ValveNavi Specifications
Table 2.1 ValveNavi Specifications
T001.eps
Product name YVP Management Software (R2.3)
Compatible OS Windows 2000 service pack 4, XP service pack 2,
or Vista service pack 1
Interface Cards supported National Instruments
AT-FBUS, PCI-FBUS, or PCMCIA-FBUS Interface card
Application Interface Software NI-FBUS Communication Manager V. 3.0 or later
For Vista V. 3.2.1 or later
Connection Direct connected to segment.
Positioners supported Model YVP110-F
Blocks supported Resource Block (RB)
Transducer Block (TB) with Device Description
AO, DI, OS
PID (optional)
Companion Device Model YVP110-F
Online Help HTML help files viewed with browser
Configuration capability Device tag, node address, block tag, Transduser Block (TB)
parameters
Query capability All block parameters
Trending A polling method
2.3 Combination of ValveNavi & YVP
The table in below shows the limitation of the functions according to the combination
between each revision of YVP110 and ValveNavi.
Table 2.2 Supported Functions by Release Number
T002.eps
Dev Rev
2
3
4
1
2
R1
✔
*1
*2
N/A
N/A
R2.1
✔
✔
*2
✔
*2
R2.2
✔
✔
*2
✔
*2
R2.3
✔
✔
✔
✔
✔
Without software
download functions
With software
download functions
✔: Applicable
*1: Not applicable to link master and signature functions
*2: Not applicable to double acting actuator
⌵ր〈: Not applicable