Yokogawa FVX110 User Manual
Page 79
<12. Parameter Lists>
12-6
IM 01S01C01-01EN
Relative
Index Index
Parameter Name
Factory Default Write
Mode
Explanation
25
2025 DISP_PAGE_INFO
2
AUTO
Parameter for turning on or off current page numbers dis-
played as an xx/yy fraction in the top right corner of the LCD
screen.
0 = On during highlighting when display screens are switched
1 = Always On
2 = Always On during highlighting
26
2026 DISP_QUIET_MODE 0
AUTO
Use to specify LCD operation after switching screens.
0 = Displays last output screen
1 = Switches screens at specified intervals to display all
screens
2 = LCD display Off
27
2027 DISP_FORMAT_TYPE 0
AUTO
Not currently used.
28
2028 DISPLAY_CYCLE
0
AUTO
Use to set interval when screens are switched.
0 = Auto (automatically set depending on ambient tempera-
ture)
1 = 0.5 sec
2 = 1.0 sec
3 = 2.0 sec
4 = 4.0 sec
29
2029 DISPLAY_TEST
0
AUTO
Parameter to turn LCD test mode on and off.
30
2030 DISPLAY_CONTRAST 32 (0x20)
AUTO
Parameter for setting relative brightness (contrast) between
the LCD when it is on and when it is off.
31
2031 SQUAWK
0
AUTO
Turns Squawk on and off.
32
2032 AMBIENT_TEMPERATURE 0
-
Indicates amplifier temperature.
33
2033 MAIN_CONNECT_TYPE 0
AUTO
Use to set the connection (MAO or ISEL function block) for 16
inputs at one time.
0 = All 16 inputs are input to simulation
1 = All 16 inputs are connected to MAO-FB
2 = All 16 inputs are connected to ISEL-FB
34
2034 IN01_CONNECTION
0
AUTO
Use to specify what values of IN01 are connected to.
0 = Simulation dISELplay
1 = Connected to MAO-FB_1 IN01
2 = Connected to ISEL-FB_1 IN01
35
2035 IN02_CONNECTION
0
AUTO
Use to specify what values of IN02 are connected to.
0 = Simulation dISELplay
1 = Connected to MAO-FB_1 IN02
2 = Connected to ISEL-FB_1 IN02
36
2036 IN03_CONNECTION
0
AUTO
Use to specify what values of IN03 are connected to.
0 = Simulation dISELplay
1 = Connected to MAO-FB_1 IN03
2 = Connected to ISEL-FB_1 IN03
37
2037 IN04_CONNECTION
0
AUTO
Use to specify what values of IN04 are connected to.
0 = Simulation dISELplay
1 = Connected to MAO-FB_1 IN04
2 = Connected to ISEL-FB_1 IN04
38
2038 IN05_CONNECTION
0
AUTO
Use to specify what values of IN05 are connected to.
0 = Simulation dISELplay
1 = Connected to MAO-FB_1 IN05
2 = Connected to ISEL-FB_1 IN05
39
2039 IN06_CONNECTION
0
AUTO
Use to specify what values of IN06 are connected to.
0 = Simulation dISELplay
1 = Connected to MAO-FB_1 IN06
2 = Connected to ISEL-FB_1 IN06
40
2040 IN07_CONNECTION
0
AUTO
Use to specify what values of IN07 are connected to.
0 = Simulation dISELplay
1 = Connected to MAO-FB_1 IN07
2 = Connected to ISEL-FB_1 IN07
41
2041 IN08_CONNECTION
0
AUTO
Use to specify what values of IN08 are connected to.
0 = Simulation dISELplay
1 = Connected to MAO-FB_1 IN08
2 = Connected to ISEL-FB_1 IN08