Yokogawa FVX110 - Manual (Page 147)

A6-5
IM 01S01C01-01EN
Relative
Index
Parameter
Write
Mode
Valid
Range
Initial
Value
View
Description/Remarks
1 2 3 4
10 IN_3 0 5 5 This is an input (input 3) for the MAO function block.
11 IN_4 0 5 5 This is an input (input 4) for the MAO function block.
12 IN_5 0 5 5 This is an input (input 5) for the MAO function block.
13 IN_6 0 5 5 This is an input (input 6) for the MAO function block.
14 IN_7 0 5 5 This is an input (input 7) for the MAO function block.
15 IN_8 0 5 5 This is an input (input 8) for the MAO function block.
16 MO_OPTS 0 2 This is an optional parameter for specifying output
operations for the MAO function block. It is mainly
used for specifying values to be transferred to LCD
Transducer Block in fault state status.
17 FSTATE_TIME Positive 0 4 An input that has become Bad and stays in that
state longer than the time set by FSTATE_TIME
transitions to the fault state status.
18 FSTATE_VAL1 0 4 A value transferred as input 1 to LCD Transducer
Block during fault state condition (optional setting)
19 FSTATE_VAL2 0 4 A value transferred as input 2 to LCD Transducer
Block during fault state condition (optional setting)
20 FSTATE_VAL3 0 4 A value transferred as input 3 to LCD Transducer
Block during fault state condition (optional setting)
21 FSTATE_VAL4 0 4 A value transferred as input 4 to LCD Transducer
Block during fault state condition (optional setting)
22 FSTATE_VAL5 0 4 A value transferred as input 5 to LCD Transducer
Block during fault state condition (optional setting)
23 FSTATE_VAL6 0 4 A value transferred as input 6 to LCD Transducer
Block during fault state condition (optional setting)
24 FSTATE_VAL7 0 4 A value transferred as input 7 to LCD Transducer
Block during fault state condition (optional setting)
25 FSTATE_VAL8 0 4 A value transferred as input 8 to LCD Transducer
Block during fault state condition (optional setting)
26 FSTATE_STATUS 0 2 2 List of inputs that have transitioned to fault state
status
27 UPDATE_EVT Indicates event information when an event update
(a change in set values) occurs.
28 BLOCK_ALM Indicates alarm information when a block alarm
occurs.