Alliance Laundry Systems HWTB21 - Manual (Page 81)

Programming NetMaster
79 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
35. Normal Rinse Agitate Time
“+035”
This option allows the owner to set the amount of time
for a rinse agitate in the Normal cycle.
How to Program Normal Rinse Agitate
Time
1. Control must be in Manual Mode. Refer to
Entering the Manual Mode.
2. Press the DELICATES (+) or the COLD (-)
keypad until “PrOg” appears in the VFD. Press
the START (enter) keypad and “+001” will
appear in the VFD.
Figure 135
3. Press the DELICATES (+) or the COLD (-)
keypad to scroll through the programmable
options until “+035” appears in the VFD. Refer
to Figure 136.
Figure 136
4. When “+035” appears in the VFD, press the
START (enter) keypad. The current number of
minutes set for the Normal Rinse Agitate Time
will appear in the VFD.
5. Press the DELICATES (+) or the COLD (-)
keypad to increase or decrease the current
number of minutes displayed in the VFD to the
desired number of minutes. Refer to Figure 137.
NOTE: The Normal Rinse Agitate Time can be set
from zero (0) to 15 minutes.
Figure 137
6. Press the START (enter) keypad when the
correct number of minutes appears in the VFD.
The next option, “+036”, will appear in the VFD.
NOTE: To program “+036” (Normal Final Spin
Time), refer to option 36. To program other
options, refer to the appropriate section.
How to Exit Programming Feature
1. Be sure the control shows a programmable option,
not a value.
2. While pressing and holding the NORMAL
keypad with one hand, press the PERM PRESS
keypad with the other hand. The control will
revert back to the ready mode. Refer to Figure 2.
C762I
C796I
C796I
C860I
1 Press this pad (+) to scroll forward or increase a value
2 Press this pad (enter) to choose a selected value or
option
3 Press this pad (-) to scroll back or decrease a value
1
3 2