Alliance Laundry Systems HWTB21 - Manual (Page 103)

Programming NetMaster
101 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
52. Smart Card Maximum Value
“+052”
This option allows the owner to set the maximum card
balance that will be accepted. If a cash value card is
inserted with a balance greater than this value, it will
not be accepted.
How to Program Smart Card Maximum
Value
1. Control must be in Manual Mode. Refer to
Entering the Manual Mode.
2. Press the DELICATES (+) or the COLD (-)
keypad until “PrOg” appears in the VFD. Press
the START (enter) keypad and “+001” will
appear in the VFD.
Figure 186
3. Press the DELICATES (+) or the COLD (-)
keypad to scroll through the programmable
options until “+052” appears in the VFD. Refer
to Figure 187.
Figure 187
4. When “+052” appears in the VFD, press the
START (enter) keypad. There are five digits in
the Smart Card Maximum Value. The fifth digit
will appear in the VFD and will flash one second
on, one second off. Refer to Figure 188.
NOTE: If the Smart Card Maximum Value is
$100.00 or more, the fifth digit is “1”. If the Smart
Card Maximum Value is $99.99 or less, the fifth
digit is “0”.
Figure 188
5. Press the DELICATES (+) or the COLD (-)
keypad to increase or decrease the value of the
fifth digit. Refer to Figure 189.
Figure 189
C762I
C813I
C813I
C826I
C860I
1 Press this pad (+) to scroll forward or increase a value
2 Press this pad (enter) to choose a selected value or
option
3 Press this pad (-) to scroll back or decrease a value
C826I
1
3 2