Alliance Laundry Systems HWTB21 - Manual (Page 71)

Programming NetMaster
69 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
How to Read Table 4
Use this table to set the amount of time for Power Fail
Reset.
The table range begins at 0 and ends at 255. Numbers
entered between 0 and 127 turn the option OFF. If a
number in this range is entered, the current cycle status
will be saved for up to six years. When power is
restored, the cycle will begin where it was interrupted.
If 133 is entered, the current cycle will be saved for up
to five minutes. If power is not restored within five
minutes, the control will erase the cycle status. The
minimum power failure time is five minutes. The
maximum power fail reset time is 127 minutes.
“+025”
NUMBER TO ENTER IN STEP 6 POWER FAIL RESET TIME
000 – 127 Turned OFF
Cycle will be saved for a minimum of 6 years
133 5 minutes without power before cycle is lost
. . . add one minute for every number up to
255 127 minutes without power before cycle is lost
Table 4