Alliance Laundry Systems HWTB21 - Manual (Page 131)

129 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Communications Mode
Infra-red Communications
The Infra-red Communications feature allows the
washer control to communicate with the Micro-Wand
IIIE. The washer control can be programmed and have
its data read without using the keypad. It may also be
used to start and stop various diagnostic tests.
How to Begin Communications with
Micro-Wand IIIE
The control will go blank and the VFD will display
“-C-” until the communication is complete. The
display will return to the previous mode. If an error
occurs that terminates communication, the VFD will
display “EI:XX” (“XX” represents the error code).
NOTE: The Infra-red Communications option
must be turned on. Refer to option 46 in
Programming NetMaster.
Card Reader Communications
(Card Models Only)
The Card Reader Communications feature allows the
washer control to communicate with the Card Reader.
The washer control can be programmed and have its
data read without using the keypad.
Network Communications
The Network Communications feature allows the
washer control to communicate with the Network. The
washer control can be programmed and have its data
read without using the keypad.