Alliance Laundry Systems HWTB21 User Manual

Page 39

Programming NetMaster

210140

6. Press the START (enter) keypad to enter the fifth

digit and display remaining four digits. The
active digit will flash one second on and one
second off. Refer to Figure 37.

Figure 37

7. Press the DELICATES (+) or the COLD (-)

keypad to increase or decrease the value of the
active digit and the START (enter) keypad to
enter the value of the digit and advance to the
next digit.

8. Press the START (enter) keypad with the last

active digit. The next option, “+008”, will appear
in the VFD.

NOTE: To program

“+008” (Special Cycle Vend

Price), refer to option 8. To program other options,
refer to the appropriate section.

How to Exit Programming Feature

1. Be sure the control shows a programmable option,

not a value.

2. While pressing and holding the NORMAL

keypad with one hand, press the PERM PRESS
keypad with the other hand. The control will
revert back to the ready mode. Refer to Figure 2.

C827I