Option 14, Special vend a end month “+014 – Alliance Laundry Systems HWTB21 User Manual

Page 51

Programming NetMaster

210140

14. Special Vend A End Month

“+014”

This option allows the owner to set the month that
Special Vend A will end.

How to Program Special Vend A End
Month

1. Control must be in Manual Mode. Refer to

Entering the Manual Mode.

2. Press the DELICATES (+) or the COLD (-)

keypad until “PrOg” appears in the VFD. Press
the START (enter) keypad and “+001” will
appear in the VFD.

Figure 58

3. Press the DELICATES (+) or the COLD (-)

keypad to scroll through the programmable
options until “+014” appears in the VFD. Refer
to Figure 59.

Figure 59

4. When “+014” appears in the VFD, press the

START (enter) keypad. The current end month
will appear in the VFD.

5. Press the DELICATES (+) or the COLD (-)

keypad to increase or decrease the end month to
the desired month. Refer to Figure 60.

If “0” is selected and Special Vend A is on,
Special Vend A will occur at the time or day of
week selected, regardless of the month.

Figure 60

6. Press the START (enter) keypad when the

correct month appears in the VFD. The next
option, “+015”, will appear in the VFD.

NOTE: To program

“+015” (Special Vend A End

Date), refer to option 15. To program other options,
refer to the appropriate section.

How to Exit Programming Feature

1. Be sure the control shows a programmable option,

not a value.

2. While pressing and holding the NORMAL

keypad with one hand, press the PERM PRESS
keypad with the other hand. The control will
revert back to the ready mode. Refer to Figure 2.

C762I

C776I

C860I

Press this pad (+) to scroll forward or increase a value

Press this pad (enter) to choose a selected value or
option

Press this pad (-) to scroll back or decrease a value