Alliance Laundry Systems HWTB21 User Manual

Page 20

NetMaster Special Features

210140

Start Pulse Operation

The control will accept pulses from a central card
reader system. The machine can be programmed to
receive a single start pulse or multiple start pulses, or
the Start Pulse Option can be turned off. The Start
Pulse Mode allows the machine to go from the
“Ready” mode to the “START” mode after single or
multiple pulses are received.

Service Door and Coin Vault
Openings

The control will capture the times and dates of the
openings of the Coin Vault and the Service Door. The
information is saved in memory. An open service door
combined with various keypad presses allows the
control to enter manual modes of operation if the
Break-In Alarm is not on. These modes include Manual
Programming, Audit Collection and Diagnostics.

Break-In Alarm

This feature allows the owner to program the machine
to signal a network alarm if the service door or coin
vault is opened without disabling the alarm first. To
avoid the alarm during coin collections, the alarm
must be disabled.

Special Vend

This feature allows the owner to program the control
to allow programmable vend prices for specific hours
and dates.

For details on programming Special Vend, refer to
Programming NetMaster.

Lucky Cycle

This feature allows the owner to program the machine
to provide a free vend cycle to customers after a
certain number of cycles have occurred.

For details on programming the Lucky Cycle Option,
refer to Programming NetMaster.

Site Code Pricing

This feature allows owners to program the control to
accept site codes for special vending that are specific
to select groups or individuals when using cards.

For details on programming the site code options, refer
to Programming NetMaster.

Special Cycle

This feature allows the owner to offer extra features to
customers for an added vend price. Features available
include extra wash time, extra rinse time, and a warm
rinse temperature.

For details on programming the Special Cycle option,
refer to Programming NetMaster.