Alliance Laundry Systems HWTB21 - Manual (Page 41)

Programming NetMaster
39 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
7. Press the DELICATES (+) or the COLD (-)
keypad to increase or decrease the value of the
active digit and the START (enter) keypad to
enter the value of the digit and advance to the
next digit.
8. Press the START (enter) keypad with the last
active digit. The next option, “+009”, will appear
in the VFD.
NOTE: To program “+009” (Special Vend A Days
Enable), refer to option 9. To program other
options, refer to the appropriate section.
How to Exit Programming Feature
1. Be sure the control shows a programmable option,
not a value.
2. While pressing and holding the NORMAL
keypad with one hand, press the PERM PRESS
keypad with the other hand. The control will
revert back to the ready mode. Refer to Figure 2.