Alliance Laundry Systems HWTB21 - Manual (Page 25)

23 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Programming NetMaster
What Can Be Programmed?
This feature allows the owner to program cycle
parameters, standard vend pricing, special vends and other
features by using the keypads. The control must have
the Manual Programming Mode enabled, which is the
factory default. This mode can only be turned OFF and
ON by using the Micro-Wand IIIE, the Smart Card
Reader or the Network. Refer to this section when
programming NetMaster.
This section offers a detailed description of all 55 options
available to program.
Each description includes instructions on when and
why the option might be used and, more importantly,
how to program the option.
For more advanced users, a quick reference list of the
options available through the programming mode is
located on this page.
NOTE: The three numbers in the Option column of
the Programmable Options list are what will be
shown in the VFD display when that option is
selected.
Programmable Options Available
OPTION DESCRIPTION
001 Audio Signal
002 Reg. Hot Wash Vend Price
003 Reg. Warm Wash Vend Price
004 Reg. Cold Wash Vend Price
005 Site Code #1 Reg. Hot Wash Vend Price
006 Site Code #1 Reg. Warm Wash Vend Price
007 Site Code #1 Reg. Cold Wash Vend Price
008 Special Cycle Vend Price
009 Special Vend A Days Enable
010 Special Vend A Start Hour
011 Special Vend A Length in Hours
012 Special Vend A Start Month
013 Special Vend A Start Date
014 Special Vend A End Month
015 Special Vend A End Date
016 Special Vend A Site Code #1
017 Special Vend A Reg. Hot Wash Vend Price
018 Special Vend A Reg. Warm Wash Vend Price
019 Special Vend A Reg. Cold Wash Vend Price
020 Special Vend A Auto-Shutdown Enable
021 Coin #1 Value
022 Coin #2 Value
023 Start Pulse Value
024 Default Cycle/Temperature
025 Power Fail Reset
026 Set Real-Time Clock Minutes
027 Set Real-Time Clock Hours
028 Set Real-Time Clock Day
029 Set Real-Time Clock Date
030 Set Real-Time Clock Month
031 Set Real-Time Clock Year
032 Set Real-Time Clock Century
033 Normal Wash Agitate Time
034 Normal Extra Rinse Agitate Time
035 Normal Rinse Agitate Time
036 Normal Final Spin Time
037 Perm Press Wash Agitate Time
038 Perm Press Extra Rinse Agitate Time
039 Perm Press Rinse Agitate Time
040 Perm Press Final Spin Time
041 Delicate Wash Agitate Time
042 Delicate Extra Rinse Agitate Time
043 Delicate Rinse Agitate Time
044 Delicate Final Spin Time
045 Warm Rinse Enable/Disable
046 Control Configuration Data #1
047 Control Configuration Data #3
048 Lucky Option
049 Special Cycle Option
050 Special Cycle Extra Wash Time
051 Special Cycle Extra Extra-Rinse Time
052 Smart Card Maximum Value
053 Site Code #1
054 Error Code Programming Parameter
055 Start Pulse Mode
OPTION DESCRIPTION