IEI Integration PM-LX2-800 User Manual
Page 85
PM-LX2-800 User Manual
Page 85
3
Serial port 3 IRQ address is 3
4
Serial port 3 IRQ address is 4
10
Serial port 3 IRQ address is 10
11 D
EFAULT
Serial port 3 IRQ address is 11
Parallel Port Address [Disabled]
Use the Parallel Port Address option to select the parallel port base address.
Disabled
D
EFAULT
No base address is assigned to the Parallel Port
378
Parallel Port I/O port address is 378
278
Parallel Port I/O port address is 278
3BC
Parallel Port I/O port address is 3BC
Parallel Port Mode [Normal]
Use the Parallel Port Mode option to select the mode the parallel port operates in.
Normal D
EFAULT
The normal parallel port mode is the standard
mode for parallel port operation.
SPP
(Bi-directional)
Parallel port outputs are 8-bits long. Inputs are
accomplished by reading 4 of the 8 bits on the
status register.
EPP + SPP
The parallel port operates in the enhanced parallel
port mode (EPP). The EPP mode supports
bi-directional communication between the system
and the parallel port device and the transmission
rates between the two are much faster than the
Normal mode.
The parallel port is also be compatible with SPP
devices described above