IEI Integration PM-LX2-800 User Manual
Page 75
PM-LX2-800 User Manual
Page 75
Enhanced D
EFAULT
Configures the on-board ATA/IDE controller to be in
Enhanced mode. In this mode, IDE channels and SATA
channels are separated. This mode supports up to 6
storage devices. Some legacy OS do not support this
mode.
Configure SATA as [IDE]
Use the Configure SATA as option to configure SATA devices as normal IDE devices.
IDE D
EFAULT
Configures SATA devices as normal IDE device.
Configure SATA Channels [Behind PATA]
Use the Configure SATA Channels option to determine how SATA channels and PATA
channels are ordered.
Before PATA
Puts SATA channels before PATA channels.
Behind PATA
D
EFAULT
Puts SATA channels behind PATA channels.
Legacy IDE Channels [PATA Pri, SATA Sec]
SATA Only
Only the SATA drives are enabled.
PATA Pri, SATA Sec
D
EFAULT
The IDE drives are enabled on the Primary
IDE channel. The SATA drives are enabled on
the Secondary IDE channel.
PATA Pri., PATA Sec
The IDE drives are enabled on the primary
and secondary IDE channels. SATA drives
are disabled.
OnBoard PCI IDE Controller [Both]
Use the OnBoard PCI IDE Controller BIOS option to specify the IDE channels used by
the onboard PCI IDE controller. The following configuration options are available.