IEI Integration NANO-LX v1.00 - Manual (Page 95)

NANO-LX CPU Card
95
4.3.4.3 Compact Flash Disk
When appropriately formatted, a compact Flash disk can serve as a bootable hard drive in
applications where installation space is limited. The Compact Flash card occupies a
secondary IDE channel. Configuration options can be found through the BIOS
configuration utility.
4.4 Jumper Configuration
The NANO-LX CPU card has seven onboard jumpers:
AT/ATX Power Mode Select (JP4)
COM1, COM2 RI Pin and Voltage Selection (Optional) (JP2)
COM3 RS422/RS485 Select (JP3)
LCD Panel (LVDS/TTL) Voltage select (JP7)
LCD PANEL SHIFT CLOCK (JP1)
PC/104-Plus VIO Voltage Select (JP5)
SERIRQ Select (JP6)
Make sure the jumper settings are properly configured before the NANO-LX CPU card is
installed into a chassis. For more information about jumper settings and configurations,
refer to Section 3.4.
4.5 Chassis Installation
The embedded module can be mounted into a chassis only after the CPU and the DIMM
module has been installed, the internal peripheral connectors have been connected to the
peripheral devices and the jumpers have been configured.
Refer to the chassis user guide for instructions on how to mount the CPU card into a
chassis.
4.6 Rear Panel Connectors
4.6.1 Serial Connection
The rear panel serial connector provides easy and quick access to external serial devices.